▼Mz  Lib:   Legacy Libraries
On this page:
abbreviate-cons-as-list
booleans-as-true/  false
use-named/  undefined-handler
named/  undefined-handler
add-make-prefix-to-constructor
hash-table-constructor-with-lists
build-share
constructor-style-printing
current-build-share-hook
current-build-share-name-hook
current-print-convert-hook
current-read-eval-convert-print-prompt
get-shared
install-converting-printer
print-convert
print-convert-expr
quasi-read-style-printing
show-sharing
whole/  fractional-exact-numbers
  top  contents    up   

 (require mzlib/pconvert) package: pconvert-lib

The mzlib/pconvert library defines routines for printing Racket values as evaluable S-expressions. Racket’s default printing mode also prints values as expressions (in contrast to the Lisp and Racket tradition of printing readable S-expressions), but mzlib/pconvert is more configurable and approximates expressions for a wider range of values. For example, procedures print using lambda instead of #<procedure>.

The print-convert procedure does not print values; rather, it converts a Racket value into another Racket value such that the new value pretty-writes as a Racket expression that evaluates to the original value. For example, (pretty-write (print-convert `(9 ,(box 5) #(6 7)))) prints the literal expression (list 9 (box 5) (vector 6 7)) to the current output port.

To install print converting into the read-eval-print loop, require mzlib/pconvert and call the procedure install-converting-printer.

In addition to print-convert, this library provides print-convert, build-share, get-shared, and print-convert-expr. The last three are used to convert sub-expressions of a larger expression (potentially with shared structure).

See also prop:print-convert-constructor-name.

parameter

(abbreviate-cons-as-list) → boolean?

(abbreviate-cons-as-list abbreviate?) → void?
  abbreviate? : any/c
A parameter that controls how lists are represented with constructor-style conversion. If the parameter’s value is #t, lists are represented using list. Otherwise, lists are represented using cons. The initial value of the parameter is #t.

parameter

(booleans-as-true/false) → boolean?

(booleans-as-true/false use-name?) → void?
  use-name? : any/c
A parameter that controls how #t and #f are represented. If the parameter’s value is #t, then #t is represented as true and #f is represented as false. The initial value of the parameter is #t.

parameter

(use-named/undefined-handler) → (any/c . -> . any/c)

(use-named/undefined-handler use-handler) → void?
  use-handler : (any/c . -> . any/c)
A parameter that controls how values that have inferred names are represented. The procedure is passed a value. If the procedure returns true, the procedure associated with named/undefined-handler is invoked to render that value. Only values that have inferred names but are not defined at the top-level are used with this handler.

The initial value of the parameter is (lambda (x) #f).

parameter

(named/undefined-handler) → (any/c . -> . any/c)

(named/undefined-handler use-handler) → void?
  use-handler : (any/c . -> . any/c)
Parameter for a procedure that controls how values that have inferred names are represented. The procedure is called only if use-named/undefined-handler returns true for some value. In that case, the procedure is passed that same value, and the result of the parameter is used as the representation for the value.

The initial value of the parameter is (lambda (x) #f).

parameter

(add-make-prefix-to-constructor) → boolean?

(add-make-prefix-to-constructor add-prefix?) → void?
  add-prefix? : any/c
A parameter that controls whether a make- prefix is added to a constructor name for a structure instance. The initial value of the parameter is #f.

parameter

(hash-table-constructor-with-lists) → boolean?

(hash-table-constructor-with-lists use-list?) → void?
  use-list? : any/c
A parameter that controls whether the key/value pairs in a hash are printed with cons or list. The initial value of the parameter is #f, meaning that a hash table like (hash 'x 1 'y 2) converts to '(make-immutable-hash (list (cons 'y 2) (cons 'x 1))).

Added in version 1.2 of package pconvert-lib.

procedure

(build-share v) → ....

  v : any/c
Takes a value and computes sharing information used for representing the value as an expression. The return value is an opaque structure that can be passed back into get-shared or print-convert-expr.

parameter

(constructor-style-printing) → boolean?

(constructor-style-printing use-constructors?) → void?
  use-constructors? : any/c
Parameter that controls how values are represented after conversion. If this parameter’s value is #t, then constructors are used; e.g., pair containing 1 and 2 is represented as (cons 1 2). Otherwise, quasiquote-style syntax is used; e.g., the pair containing 1 and 2 is represented as `(1 . 2). The initial value of the parameter is #f.

The constructor used for mutable pairs is mcons, unless print-mpair-curly-braces is set to #f, in which case cons and list are used. Similarly, when using quasiquote style and print-mpair-curly-braces is set to #f, mutable pair constructions are represented using quote, quasiquote, etc.

See also quasi-read-style-printing and prop:print-convert-constructor-name.

parameter

(current-build-share-hook)

 → 
(any/c (any/c . -> . void?)
       (any/c . -> . void?) . -> . any)
(current-build-share-hook hook) → void?
  hook : 
(any/c (any/c . -> . void?)
       (any/c . -> . void?) . -> . any)
Parameter that sets a procedure used by print-convert and build-share to assemble sharing information. The procedure hook takes three arguments: a value v, a procedure basic-share, and a procedure sub-share; the return value is ignored. The basic-share procedure takes v and performs the built-in sharing analysis, while the sub-share procedure takes a component of v ands analyzes it. Sharing information is accumulated as values are passed to basic-share and sub-share.

A current-build-share-hook procedure usually works together with a current-print-convert-hook procedure.

parameter

(current-build-share-name-hook)

 → (any/c . -> . (or/c symbol? false/c))
(current-build-share-name-hook hook) → void?
  hook : (any/c . -> . (or/c symbol? false/c))
Parameter that sets a procedure used by print-convert and build-share to generate a new name for a shared value. The hook procedure takes a single value and returns a symbol for the value’s name. If hook returns #f, a name is generated using the form “-n-, where n is an integer.

parameter

(current-print-convert-hook) → 
(any/c (any/c . -> . any/c)
       (any/c . -> . any/c)
       . -> . any/c)
(current-print-convert-hook hook) → void?
  hook : 
(any/c (any/c . -> . any/c)
       (any/c . -> . any/c)
       . -> . any/c)
Parameter that sets a procedure used by print-convert and print-convert-expr to convert values. The procedure hook takes three arguments—a value v, a procedure basic-convert, and a procedure sub-convert—and returns the converted representation of v. The basic-convert procedure takes v and returns the default conversion, while the sub-convert procedure takes a component of v and returns its conversion.

A current-print-convert-hook procedure usually works together with a current-build-share-hook procedure.

parameter

(current-read-eval-convert-print-prompt) → string?

(current-read-eval-convert-print-prompt str) → void?
  str : string?
Parameter that sets the prompt used by install-converting-printer. The initial value is "|- ".

procedure

(get-shared share-info [cycles-only?])

 → (list-of (cons/c symbol? any/c))
  share-info : ....
  cycles-only? : any/c = #f
The shared-info value must be a result from build-share. The procedure returns a list matching variables to shared values within the value passed to build-share.

The default value for cycles-only? is #f; if it is not #f, get-shared returns only information about cycles.

For example,

(get-shared (build-share (shared ([a (cons 1 b)]
                                  [b (cons 2 a)])
                           a)))

might return the list

'((-1- (cons 1 -2-)) (-2- (cons 2 -1-)))

procedure

(install-converting-printer) → void?

Sets the current print handler to print values using print-convert and sets print-as-expression to #f (since the conversion of a value is meant to be printed in readable form rather than evaluable form). The current read handler is also set to use the prompt returned by current-read-eval-convert-print-prompt.

procedure

(print-convert v [cycles-only?]) → any/c

  v : any/c
  cycles-only? : any/c = (show-sharing)
Converts the value v. If cycles-only? is not #f, then only circular objects are included in the output.

procedure

(print-convert-expr share-info    
  v    
  unroll-once?) → any/c
  share-info : ....
  v : any/c
  unroll-once? : any/c
Converts the value v using sharing information share-info, which was previously returned by build-share for a value containing v. If the most recent call to get-shared with share-info requested information only for cycles, then print-convert-expr will only display sharing among values for cycles, rather than showing all value sharing.

The unroll-once? argument is used if v is a shared value in share-info. In this case, if unroll-once? is #f, then the return value will be a shared-value identifier; otherwise, the returned value shows the internal structure of v (using shared value identifiers within v’s immediate structure as appropriate).

parameter

(quasi-read-style-printing) → boolean?

(quasi-read-style-printing on?) → void?
  on? : any/c
Parameter that controls how vectors and boxes are represented after conversion when the value of constructor-style-printing is #f. If quasi-read-style-printing is set to #f, then boxes and vectors are unquoted and represented using constructors. For example, the list of a box containing the number 1 and a vector containing the number 1 is represented as `(,(box 1) ,(vector 1)). If the parameter’s value is #t, then #&.... and #(....) are used, e.g., `(#&1 #(1)). The initial value of the parameter is #t.

parameter

(show-sharing) → boolean?

(show-sharing show?) → void?
  show? : any/c
Parameter that determines whether sub-value sharing is conserved (and shown) in the converted output by default. The initial value of the parameter is #t.

parameter

(whole/fractional-exact-numbers) → boolean?

(whole/fractional-exact-numbers whole-frac?) → void?
  whole-frac? : any/c
Parameter that controls how exact, non-integer numbers are converted when the numerator is greater than the denominator. If the parameter’s value is #t, the number is converted to the form (+ integer fraction) (i.e., a list containing '+, an exact integer, and an exact rational less than 1 and greater than -1). The initial value of the parameter is #f.

  top  contents    up